This customer is putting a new engine in this car that dyno'd out at 601 HP so we are putting a new clip and boxing the frame for him as well as fixing anything else that is needed to make it safe

The engine was hard mounted to the frame with a homemade bracket that someone had to cut to clear the steering column knuckles so we are removing that and fabricating engine mounts that will allow for some movement when the engine torques.

Here the clip has been cut out

Now it's time to grind off all these snotty welds

We split the fenders to fix the shape back closer to original - they were patched and patched and bondo'd which you can see in the next few pics

We found gaping holes filled with bondo and newspaper

The bondo never ended

here you can see where we used a moon hubcap to make a nice adjustment to the fender to clear the brackets on the new clip 

must have been a gallon of bondo in this fender!